133

Features
-	All New Designed Pro Clamp-On Meter
-	10,000 Count digital display
-	Active Backlit, Large scale display
-	Volt Sense (None Contact Voltage)
-	Analog Bar graph
-	True RMS reading on AC and AC+DC mode
-	Torch lightening when clamping
-	Power and Power factor Measurement
-	Total Harmonics Distortion and Harmonics 1 to 25
-	Phase Rotation Indication
-	100K Ohms Resistance capability
-	Inrush Current

Features
-	All New Designed Pro Clamp-On Meter
-	10,000 Count digital display
-	Active Backlit, Large scale display
-	Volt Sense (None Contact Voltage)
-	Analog Bar graph
-	True RMS reading on AC and AC+DC mode
-	Torch lightening when clamping
-	Power and Power factor Measurement
-	Total Harmonics Distortion and Harmonics 1 to 25
-	Phase Rotation Indication
-	100K Ohms Resistance capability
-	Inrush Current

SPECIFICATIONS
ACA	100.00A, 600.0A
ACV	100.00V~1000V
DCV	100.00V~1000V
AC+DC V	100.00V~1000V
Watt	10KW~600KW
P.F.	-1.00~1.00
T.H.D.	0.1%~100.0%
Harmonics	0.1%~100.0%
OHM	1.0000KΩ, 10.00KΩ, 100.00KΩ
Continuity Beeper	<30Ω, 2KHz tone buzzer
Diode Test	2.000V
Capacitance	400.0μF, 4.000mF
Frequency Counter	20.0Hz~10KHz
GENERAL
Display	10,000
Sampling Rate	3 times / sec
Overload Indication	"OL" or "-OL"
Low Battery Indication
Auto Power Off	Approx. 15 minutes
Operating Temperature	0°C~50°C, ≤80%RH
Storage Temperature	-20°C~60°C
Temperature Coefficient	0.2 x (Spec. Acc) / °C, <18°C or >28°C
Safety	CAT IV 600V / CAT III 1000V
Maximum Conductor Size	37mm dia. (750MCM)
Maximum Jaw Opening	45mm
Maximum Busbar Size	45 x 10mm
Power Requirement	Single 9V battery (NEDA 1604 / IEC 6F22)
Battery Life: In hours (Alkaline battery, Without Backlight)	50
Size: W x L x D	87.5 x 242 x 50.5mm
Weight	435g
Included with instrument	Test Leads, Zinc Battery, Manual, Carrying Case