|
Features |
|
|
- |
High Performance Process Multimeter |
|
- |
50000 count extra large digital display |
|
- |
Auto Backlit, Dual display |
|
- |
On-Screen-Menu Selection |
|
- |
Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp |
|
- |
HART mode setting with Loop Power |
|
Features |
|
|
- |
High Performance Process Multimeter |
|
- |
50000 count extra large digital display |
|
- |
Auto Backlit, Dual display |
|
- |
On-Screen-Menu Selection |
|
- |
Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp |
|
- |
HART mode setting with Loop Power |
|
SPECIFICATIONS |
|
|
DCV |
50mV~1000V |
|
ACV |
50mV~1000V |
|
DCA |
50mA~1A |
|
ACA |
50mA~1A |
|
OHM |
500Ω~50MΩ |
|
Diode Test |
2.000V |
|
Continuity Test |
<30Ω, 2kHz tone buzzer |
|
Frequency Counter |
500Hz~100KHz |
|
Source/Simulate mode |
DC 0mA to 24mA, 0.05% of span, 32V Output |
|
Loop Power mode |
DC 50mA, 32V Output |
|
Loop supply |
30V/1,25kΩ |
|
Loop supply (HART) |
24V/1kΩ |
|
GENERAL |
|
|
Display |
50,000 |
|
Sampling Rate |
10 times / sec |
|
Overload Indication |
"OL" or "-OL" |
|
Low Battery Indication |
|
|
Auto Power Off |
20 minutes |
|
Operating Temperature |
-10°C~50°C, ≤80%RH |
|
Storage Temperature |
-20°C~60°C |
|
Temperature Coefficient |
0.1 x (Spec. Acc) / °C, <18°C, >28°C |
|
Safety |
CAT IV 600V / CAT III 1000V |
|
Battery Life: in hours (Alkaline battery) |
100 |
|
Power Requirement |
AA Size 1.5V x 4 Batteries (NEDA 15A/IEC LR6) |
|
Size: W x L x D |
95 x 207 x 52mm |
|
Weight |
630g |
|
Included with instrument |
Test Leads, Alligator Clips, USB Cable, Software, Magnetic Hanging Kit, Alkaline Battery, Protective Holster |
